incubator-retired-ripple.git
6 years agoAdd RETIRED.txt to top level of repo. master
Marvin Humphrey [Sun, 31 Jan 2016 16:38:23 +0000 (08:38 -0800)] 
Add RETIRED.txt to top level of repo.

6 years agoAdd support for Insomnia-PhoneGap-Plugin.
Leo von Klenze [Sat, 19 Sep 2015 17:53:08 +0000 (19:53 +0200)] 
Add support for Insomnia-PhoneGap-Plugin.

6 years agoScanditSDK: Do not start the scanner twice.
Leo von Klenze [Sat, 8 Aug 2015 17:01:48 +0000 (19:01 +0200)] 
ScanditSDK: Do not start the scanner twice.

The scanner should never start twice even if from the application requested.

6 years agoCatch unhandled ScanditSDK calls and log them.
Leo von Klenze [Sat, 18 Jul 2015 11:21:17 +0000 (13:21 +0200)] 
Catch unhandled ScanditSDK calls and log them.

If a call to a function in a plugin does not exist, an error will be displayed. This disrupts the application flow. Therefore we implement the known calls and just log them as a warning to the console of the browser.

This closes #67

6 years agoThis closes #33
Tim Barham [Mon, 19 Oct 2015 18:13:41 +0000 (11:13 -0700)] 
This closes #33

6 years agoRIPPLE-99 Updated emulation for Vibration API
Julian Horn [Mon, 10 Aug 2015 14:55:13 +0000 (10:55 -0400)] 
RIPPLE-99 Updated emulation for Vibration API

The Vibration API has added two new native functions: vibrateWithPattern
and cancelVibration.  The vibrateWithPattern function takes an array of
integers and alternately waits and then shakes by the indicated number of
milliseconds.  The cancelVibration function stops the current vibration
action, either initiated by the old vibrate function or
vibrateWithPattern.

Formally vibrateWithPattern requires the shaking to occur for a specific
period of time, rather than just "N shakes".  It's not critical that we
get that exactly right, but it is necessary that the shaking not go on
too long as that can cause two shaking patterns to run into one another.
Accordingly I changed the estimate that one shake will last 160 ms
rather than 100 ms.

This closes #72

6 years agoRIPPLE-100 Fix battery status event emulation
Julian Horn [Tue, 8 Sep 2015 19:25:51 +0000 (15:25 -0400)] 
RIPPLE-100 Fix battery status event emulation

Fixed the logic so that you get a batterycritical event when the battery status changes from above 5 to 5 or below, not just when the battery status changes to exactly 5.  Similarly for batterylow event.  Note that you must test for batterycritical before checking for batterylow, e.g. slider move from 25 to 2 causes batterycritical, not batterylow. Seemed like overkill to trigger both events at the same time.

This closes #74

7 years agoRemove dredd.txt and fail.txt. 73/head
Tim Barham [Sat, 29 Aug 2015 02:06:03 +0000 (12:06 +1000)] 
Remove dredd.txt and fail.txt.

7 years agoUpdate jake archive to produce SHA-1 instead of SHA-512.
Tim Barham [Mon, 17 Aug 2015 06:00:16 +0000 (16:00 +1000)] 
Update jake archive to produce SHA-1 instead of SHA-512.

Also, includes tgz filename in sha1 and md5 files.

7 years agov0.9.32 0.9.32
Tim Barham [Mon, 17 Aug 2015 04:25:45 +0000 (14:25 +1000)] 
v0.9.32

7 years agoRIPPLE-87 Ripple can't emulate a multiple page application.
Sylvain Garden [Mon, 3 Aug 2015 15:01:49 +0000 (17:01 +0200)] 
RIPPLE-87 Ripple can't emulate a multiple page application.

Re-using the existing `module.exports.init` when navigating between pages means we are re-using the old `cordova` object which is invalid.

This closes #71

7 years agoMerge branch 'kai/fix-ripple-95'
Brent Lintner [Fri, 7 Aug 2015 14:30:10 +0000 (10:30 -0400)] 
Merge branch 'kai/fix-ripple-95'

GitHub PR:

https://github.com/apache/incubator-ripple/pull/70

7 years agoRevert "Validate command-line options." 70/head
Arzhan Kinzhalin [Sat, 1 Aug 2015 14:05:09 +0000 (11:05 -0300)] 
Revert "Validate command-line options."

See RIPPLE-95. This is improper validation.

This reverts commit 5fcf93a50ff8eaea96ca8734f2ecb1259b48b5f3.

7 years agoFixed log message 69/head
ProH4Ck [Fri, 31 Jul 2015 07:52:38 +0000 (09:52 +0200)] 
Fixed log message

Earl Gray Tea doesn't exist but Earl Grey Tea is a very good drink!

7 years agov0.9.31 0.9.31
Tim Barham [Thu, 23 Jul 2015 05:44:26 +0000 (15:44 +1000)] 
v0.9.31

7 years agoLICENCE and NOTICE file updates.
Tim Barham [Thu, 23 Jul 2015 05:20:39 +0000 (15:20 +1000)] 
LICENCE and NOTICE file updates.

* Added '-2015' to NOTICE copyright year.
* Removed 'Apache Cordova' entry from LICENSE file.
* Added 'parseUrl' entry to LICENSE file.
* Updated copyrights for accelerometer.js.

7 years agoFixed RIPPLE-94 bugs in Console and Contacts APIs 68/head
Julian Horn [Tue, 21 Jul 2015 20:58:40 +0000 (16:58 -0400)] 
Fixed RIPPLE-94 bugs in Console and Contacts APIs

This commit fixes some problems with the Console plugin emulation as well
as the Contacts plugin emulation.  These bugs were discovered by running
the Mobile Spec test under emulation.

7 years agoFix RIPPLE-93.
Arzhan Kinzhalin [Wed, 15 Jul 2015 01:16:19 +0000 (11:16 +1000)] 
Fix RIPPLE-93.

When emulating locally, change current working directory to the project path
specified by --path.

This closes #65

7 years agoValidate command-line options.
Arzhan Kinzhalin [Tue, 30 Jun 2015 22:52:02 +0000 (19:52 -0300)] 
Validate command-line options.

Some shallow validation of the command-line options. It is needed for
the emulate logic to be able to assume that options.<opt> name has the
right amount of elements. The validation is added for 'emulate' command
only so far.

7 years agoLook up cordova prepare when creating middleware.
Arzhan Kinzhalin [Tue, 30 Jun 2015 22:51:14 +0000 (19:51 -0300)] 
Look up cordova prepare when creating middleware.

Instead of at the module load time.

7 years agoImprove the accelerometer UI.
Arzhan Kinzhalin [Wed, 1 Jul 2015 19:32:12 +0000 (16:32 -0300)] 
Improve the accelerometer UI.

Changes include:
    - Make it more compact.
    - Actionable controls (canvas and the shake button) closer together.
    - Change the unit notation.

This closes #66

7 years agoFix whitespace issue introduced in #59. 64/head
Arzhan Kinzhalin [Tue, 30 Jun 2015 03:00:38 +0000 (00:00 -0300)] 
Fix whitespace issue introduced in #59.

7 years agoRIPPLE-91 Fix gpx file implementation in Geolocation panel.
Julian Horn [Thu, 18 Jun 2015 19:52:53 +0000 (15:52 -0400)] 
RIPPLE-91 Fix gpx file implementation in Geolocation panel.

Clicking on the gpx file input box raises a file picker dialog. Selecting a file usually leads to a change event on the input box. This causes loadGpxFile to be called, passing in two null values and an array containing one element, which is the change event. loadGpxFile then extracts the change event from the array, extracts the array of files selected by the file picker from the change event, and reads the file that is the first element of this array.

There are a number of problems with this implementation.
1) if you select a file and then click on the input box again and cancel out of the file picker, then you select no files but still generate a change event.  This causes loadGpxFile to throw an unhandled exception.
2) if an error were to occur while reading the file, loadGpxFile would call a null function value (the "fail" callback).
3) loadGpx has an absurd interface.  This routine is only called in one place.  All you need is a string which is the file to load.

The fix is to verify that a file was selected before calling loadGpxFile, and to have loadGpxFile call console.log to report read errors.

In addition to fixing these problems, I also cleaned up the mixture of CR and CRLF line endings.  This was the only change to geoView/panel.html.

This closes #63

7 years agoRIPPLE-83 Fix Cordova prepare logic.
Arzhan Kinzhalin [Sat, 9 May 2015 04:30:08 +0000 (01:30 -0300)] 
RIPPLE-83 Fix Cordova prepare logic.

When switching devices, platform for previous device rather than new devices is prepared.

Instead of preparing on a GET in the middleware, prepare when the client reports a new User-Agent is set (either after the bootstrap or when a device is changed).

Details:

1. Propagate POST to /ripple/user-agent through the middleware.
2. Add cordovaPrepare.js whose sole purpose is to respond to platform changes
   (only for local apps).
3. Remove all the prepare logic from hosted.

This closes #52

7 years agoImprove jake lint.
Arzhan Kinzhalin [Tue, 19 May 2015 22:21:53 +0000 (19:21 -0300)] 
Improve jake lint.

- Fail the task when the process returns error code.
- Run linters in parallel.
- Remove excessive arguments.

This closes #59

7 years agoRIPPLE-85 Button index is adjusted twice in notifications.
Arzhan Kinzhalin [Fri, 15 May 2015 05:36:51 +0000 (02:36 -0300)] 
RIPPLE-85 Button index is adjusted twice in notifications.

This closes #55

7 years agoFix fixwhitespace task.
Arzhan Kinzhalin [Fri, 15 May 2015 05:48:45 +0000 (02:48 -0300)] 
Fix fixwhitespace task.

When a Windows user uses git with `core.autocrlf` option, the files are checked out using Windows line-endings and converted back to `\n` on commit. The regular expression corrected wouldn't catch trailing spaces on lines with `\r\n`. Instead, let the regexp engine to care of line-endings using multiline regex and end-of-line.

Also, check build files.

This closes #56

7 years agoRIPPLE-89 Battery Status panel throws exception if no cordova.js.
Julian Horn [Thu, 18 Jun 2015 14:40:43 +0000 (10:40 -0400)] 
RIPPLE-89 Battery Status panel throws exception if no cordova.js.

Instead of throwing an exception when cordova.js is not present, just fail silently.

This closes #61

7 years agoFixed RIPPLE-88 62/head
Julian Horn [Thu, 18 Jun 2015 14:40:43 +0000 (10:40 -0400)] 
Fixed RIPPLE-88

The previous fix for RIPPLE-74 rendered the properties created by Ripple
both non-configurable and non-enumable.  Making the properties
non-configurable means they cannot be replaced by the program under test,
and it turns out that cordova.js does just this, hence RIPPLE-88.

I marked the new properties as both configureable and enumerable.
The A+ solution would be to test to see if the property being defined
already exists, and if it does, then use the existing metadata values
for writable and enumerable, but I didn't do all that.

7 years agov0.9.30 0.9.30
Tim Barham [Wed, 27 May 2015 23:07:06 +0000 (16:07 -0700)] 
v0.9.30

7 years agoUpdate OpenLayers license and credits to v2.12.
Arzhan Kinzhalin [Sat, 16 May 2015 17:52:12 +0000 (14:52 -0300)] 
Update OpenLayers license and credits to v2.12.

    - Version 2.12 is what is included, the license was not updated.
      For more details on OpenLayers version 2.12 see:
      https://github.com/openlayers/openlayers/releases/tag/release-2.12

    - Update XMLHttpRequest license.
      Provide the link to actual XMLHttpRequest.js being used.

    - Remove trailing whitespaces.

This closes #58

7 years agoRIPPLE-86 Ripple won't launch on IE or Edge. 60/head
Tim Barham [Tue, 19 May 2015 23:44:46 +0000 (16:44 -0700)] 
RIPPLE-86 Ripple won't launch on IE or Edge.

Switch to use document.URL instead of document.documentURI, which isn't supported by IE or Edge.

Also camera plugin UI is broken - use window.URL if it is available, before falling back on window.webkitURL.

There are still likely some CSS issues (a bunch of webkit specific stuff in there), but this gives us basic support.

7 years agoClean up credits for the pieces not distributed. 57/head
Arzhan Kinzhalin [Fri, 15 May 2015 06:35:28 +0000 (03:35 -0300)] 
Clean up credits for the pieces not distributed.

7 years agoThe next branch no longer exists. 53/head
Brent Lintner [Wed, 13 May 2015 15:17:00 +0000 (11:17 -0400)] 
The next branch no longer exists.

The README should be updated accordingly.

7 years agoAdd more specific build requirements. 54/head
Arzhan Kinzhalin [Thu, 14 May 2015 01:01:19 +0000 (22:01 -0300)] 
Add more specific build requirements.

- Specify nodejs and npm as in [current] package.json.
- Restructure requirements into common and platform-specific.

7 years agov0.9.29 0.9.29
Tim Barham [Tue, 12 May 2015 04:09:46 +0000 (14:09 +1000)] 
v0.9.29

7 years agoReinstate XMLHttpRequest.js license.
Tim Barham [Tue, 12 May 2015 03:21:16 +0000 (13:21 +1000)] 
Reinstate XMLHttpRequest.js license.

Reinstates the XMLHttpRequest.js license in LICENSE, referencing the correct version of the file (that was licensed under the Apache license).

Also indents licenses for code that is contained within OpenLayers.js to make that a little clearer.

7 years agoAdds 'jake rat' task to run Apache RAT, which verifies license headers in the project...
Tim Barham [Tue, 12 May 2015 02:48:43 +0000 (12:48 +1000)] 
Adds 'jake rat' task to run Apache RAT, which verifies license headers in the project are valid (that is, license headers exist in all files that need them, and are recognized and of a type acceptable in an Apache project).

7 years agoUpdate node and npm minimum version in package.json engines.
Tim Barham [Tue, 12 May 2015 02:27:41 +0000 (12:27 +1000)] 
Update node and npm minimum version in package.json engines.

7 years agoFixed a couple of test problems
Julian Horn [Mon, 20 Apr 2015 15:35:19 +0000 (11:35 -0400)] 
Fixed a couple of test problems

Updated version of jsdom from 0.6.x to 3.1.0.
The older jsdom fails with a RangeError, saying
"The normalization form should be one of NFC, NFD, NFKC, NFKD."
I tested the newer jsdom with node 0.11.15 and 0.12.0.
I can't get Ripple to install with node 0.10.5, because some modules
require version specifications containing "^", and that form isn't
understood by the version of npm that comes with node 0.10.5.

Also had to update bower to version 1.3.12 for similar reasons.
It wasn't successfully installing jasmine into thirdparty folder.
Finally, fixed a unit test that only passed if two calls to Date retrned
the same value.  The calls are close together so this usually works,
but it does cause intermittant failures.

7 years agoRIPPLE-74 Ripple does not pass geolocation info to app. 51/head
Tim Barham [Wed, 6 May 2015 05:32:08 +0000 (15:32 +1000)] 
RIPPLE-74 Ripple does not pass geolocation info to app.

The underlying problem here was that Ripple was failing to patch window.navigator.

7 years agoThere was some lint in a client file. 50/head
Brent Lintner [Tue, 21 Apr 2015 14:40:08 +0000 (10:40 -0400)] 
There was some lint in a client file.

7 years agoThere was some lint in the build archive module.
Brent Lintner [Tue, 21 Apr 2015 14:36:36 +0000 (10:36 -0400)] 
There was some lint in the build archive module.

7 years agoMerge branch 'timwindows_master'
Brent Lintner [Tue, 21 Apr 2015 14:53:04 +0000 (10:53 -0400)] 
Merge branch 'timwindows_master'

7 years agoMerge branch 'master' of https://git-wip-us.apache.org/repos/asf/incubator-ripple
Ross Gardler [Fri, 17 Apr 2015 17:30:30 +0000 (10:30 -0700)] 
Merge branch 'master' of https://git-wip-us.apache.org/repos/asf/incubator-ripple

7 years agofix link to Cordova, remove incorrect reference to XMLHttpRequest
Ross Gardler [Fri, 17 Apr 2015 17:29:55 +0000 (10:29 -0700)] 
fix link to Cordova, remove incorrect reference to XMLHttpRequest

7 years agoUpdates URLs for documentation and download to the Apache Incubator sites 48/head
Tim Windsor [Thu, 16 Apr 2015 20:34:01 +0000 (16:34 -0400)] 
Updates URLs for documentation and download to the Apache Incubator sites

7 years agoRIPPLE-80 Add some tools to jake to support creating Apache archives. 45/head
Tim Barham [Thu, 19 Mar 2015 07:00:55 +0000 (17:00 +1000)] 
RIPPLE-80 Add some tools to jake to support creating Apache archives.

Adds new 'archive' task to jake:

Creates a tgz file for a tag or branch, either for the Apache archives or npm.

Usage:

jake archive[apache|npm,allow-pending,<tagname>]

apache: (default) Create an Apache archive (creates a git archive, signs it, and creates .md5 and .sha hashes).

npm: Create an npm package (requires built files to be present, and does not sign).

allow-pending: If specified, allow uncommitted changes to exist when packaging (only use this for testing). This option is ignored when creating an Apache archive, since that is created directly from git.

<tagname>: If specified, an existing tag or branch to archive. Otherwise defaults to the most recent tag.

examples:

jake archive
jake archive[npm,allow-pending]
jake archive[0.9.27]
jake archive[npm,my_feature_branch]

7 years agoThis `build.sh` script is no longer used by anyone. 44/head
Brent Lintner [Tue, 17 Mar 2015 21:43:35 +0000 (17:43 -0400)] 
This `build.sh` script is no longer used by anyone.

It was an old artifact from BB used and built Ripple.

7 years agoClean up some whitespace and CSS issues. 43/head
Tim Barham [Fri, 6 Mar 2015 05:53:55 +0000 (15:53 +1000)] 
Clean up some whitespace and CSS issues.

Building with jake was reporting some whitespace issues, and jake deploy was reporting some CSS issues. This cleans those up.

7 years agov0.9.28 0.9.28
Brent Lintner [Fri, 6 Mar 2015 02:43:32 +0000 (21:43 -0500)] 
v0.9.28

7 years agoMerge branch 'RIPPLE-79'
Brent Lintner [Fri, 6 Mar 2015 02:37:24 +0000 (21:37 -0500)] 
Merge branch 'RIPPLE-79'

GitHub PR:

https://github.com/apache/incubator-ripple/pull/42

7 years agoMerge branch 'RIPPLE-78'
Brent Lintner [Fri, 6 Mar 2015 02:35:37 +0000 (21:35 -0500)] 
Merge branch 'RIPPLE-78'

GitHub PR:

https://github.com/apache/incubator-ripple/pull/41

7 years agoRIPPLE-79 Cordova Android platform 'App' service renamed 'CoreAndroid'. 42/head
Tim Barham [Thu, 5 Mar 2015 07:30:44 +0000 (17:30 +1000)] 
RIPPLE-79 Cordova Android platform 'App' service renamed 'CoreAndroid'.

In cordova-android 4.0.0, the 'App' service has been renamed to 'CoreAndroid'.

This change adds support for the CoreAndroid service - currently identical to the existing App bridge, but of course it may change going forwards (while App should remain unchanged, for backwards compatibility).

7 years agoRIPPLE-78 Unexpected prompt for App.messageChannel with Cordova 4.3.0 41/head
Tim Barham [Thu, 5 Mar 2015 06:41:00 +0000 (16:41 +1000)] 
RIPPLE-78 Unexpected prompt for App.messageChannel with Cordova 4.3.0

Cordova 4.3.0 adds a call to App.messageChannel during app initialization (on Android). Ripple doesn't know about the messageChannel action, and so displays the 'I Haz Cheeseburger?!?!' prompt to request a response to the exec call.

7 years agov0.9.27 0.9.27
Brent Lintner [Wed, 4 Mar 2015 21:34:01 +0000 (16:34 -0500)] 
v0.9.27

7 years agoThe ASF comments are showing up in cli help logs. 40/head
Brent Lintner [Tue, 3 Mar 2015 19:25:59 +0000 (14:25 -0500)] 
The ASF comments are showing up in cli help logs.

The rather interesting way comments are logged does not include
stripping out any comments.

This is a hasty way, although there could be better alternatives
in the future.

7 years agoThe indented list (in README) should be > 1 space per indent.
Brent Lintner [Fri, 27 Feb 2015 20:56:13 +0000 (15:56 -0500)] 
The indented list (in README) should be > 1 space per indent.

7 years agoExtra space character in README.
Brent Lintner [Fri, 27 Feb 2015 20:55:46 +0000 (15:55 -0500)] 
Extra space character in README.

7 years agov0.9.26 0.9.26
Brent Lintner [Tue, 17 Feb 2015 21:59:53 +0000 (16:59 -0500)] 
v0.9.26

7 years agoRIPPLE-77 Need to include DISCLAIMER and NOTICE files in package 39/head
Tim Barham [Mon, 16 Feb 2015 07:43:26 +0000 (17:43 +1000)] 
RIPPLE-77 Need to include DISCLAIMER and NOTICE files in package

7 years agov0.9.25 38/head 0.9.25
Tim Barham [Wed, 11 Feb 2015 02:38:29 +0000 (12:38 +1000)] 
v0.9.25

7 years agoRIPPLE-76: Adding security warning for "Remote" proxy 37/head
Ilya Buziuk [Wed, 4 Feb 2015 13:23:23 +0000 (16:23 +0300)] 
RIPPLE-76: Adding security warning for "Remote" proxy

7 years agoRIPPLE-75 Some source files are missing Apache 2.0 license header. 36/head
Tim Barham [Thu, 29 Jan 2015 21:58:42 +0000 (13:58 -0800)] 
RIPPLE-75 Some source files are missing Apache 2.0 license header.

7 years agoA small lint.
Brent Lintner [Sun, 16 Nov 2014 19:47:42 +0000 (14:47 -0500)] 
A small lint.

7 years agoMerge PR: https://github.com/apache/incubator-ripple/pull/34
Brent Lintner [Sun, 16 Nov 2014 19:40:24 +0000 (14:40 -0500)] 
Merge PR: https://github.com/apache/incubator-ripple/pull/34

7 years agoMerge PR: https://github.com/apache/incubator-ripple/pull/35
Brent Lintner [Sun, 16 Nov 2014 19:33:00 +0000 (14:33 -0500)] 
Merge PR: https://github.com/apache/incubator-ripple/pull/35

7 years agoMerge PR: https://github.com/apache/incubator-ripple/pull/31
Brent Lintner [Sun, 16 Nov 2014 19:22:38 +0000 (14:22 -0500)] 
Merge PR: https://github.com/apache/incubator-ripple/pull/31

7 years agofix invalid call of db.save(...) if the default (local) proxy is set 35/head
Andreas Gebhardt [Tue, 28 Oct 2014 20:33:25 +0000 (21:33 +0100)] 
fix invalid call of db.save(...) if the default (local) proxy is set

7 years agoRIPPLE 71: Adding BarcodeScanner plugin support 34/head
Ilya Buziuk [Wed, 8 Oct 2014 12:46:58 +0000 (15:46 +0300)] 
RIPPLE 71: Adding BarcodeScanner plugin support

8 years agov0.9.24 0.9.24
Brent Lintner [Fri, 26 Sep 2014 00:38:16 +0000 (20:38 -0400)] 
v0.9.24

8 years agoRogue log in tests.
Brent Lintner [Fri, 26 Sep 2014 00:30:13 +0000 (20:30 -0400)] 
Rogue log in tests.

8 years agoThere was a small lint issue.
Brent Lintner [Fri, 26 Sep 2014 00:28:00 +0000 (20:28 -0400)] 
There was a small lint issue.

8 years agoRIPPLE-69: Adding cordova-3.6.x support 32/head
Ilya Buziuk [Wed, 24 Sep 2014 11:19:38 +0000 (14:19 +0300)] 
RIPPLE-69: Adding cordova-3.6.x support

8 years agoThese showed started showing up as "ready only"- ignore for now.
Brent Lintner [Sun, 7 Sep 2014 22:08:08 +0000 (18:08 -0400)] 
These showed started showing up as "ready only"- ignore for now.

8 years agoMissing some semi colons.
Brent Lintner [Sun, 7 Sep 2014 22:08:01 +0000 (18:08 -0400)] 
Missing some semi colons.

8 years agoMerge branch 'battery_status'
Brent Lintner [Sun, 7 Sep 2014 22:06:16 +0000 (18:06 -0400)] 
Merge branch 'battery_status'

https://github.com/apache/incubator-ripple/pull/27

8 years agoMerge branch 'cursor_move'
Brent Lintner [Mon, 1 Sep 2014 20:11:35 +0000 (16:11 -0400)] 
Merge branch 'cursor_move'

https://github.com/apache/incubator-ripple/pull/28

8 years agoChanged daylight saving label 29/head
Robin van Baalen [Tue, 12 Aug 2014 19:41:03 +0000 (15:41 -0400)] 
Changed daylight saving label

Changed typo in label.

8 years agoChanging cursor when there is an ability of moving tool panels 28/head
Ilya Buziuk [Tue, 5 Aug 2014 09:18:24 +0000 (12:18 +0300)] 
Changing cursor when there is an ability of moving tool panels

8 years agoAdding BatteryStatus support 27/head
Ilya Buziuk [Fri, 1 Aug 2014 13:23:31 +0000 (16:23 +0300)] 
Adding BatteryStatus support

8 years agoAdding build requirements for windows to README.md 26/head
Ilya Buziuk [Fri, 18 Jul 2014 09:59:33 +0000 (12:59 +0300)] 
Adding build requirements for windows to README.md

8 years agov0.9.23 0.9.23
Brent Lintner [Thu, 26 Jun 2014 14:22:06 +0000 (10:22 -0400)] 
v0.9.23

8 years agoMerge branch 'RIPPLE-63'
Brent Lintner [Thu, 26 Jun 2014 13:59:18 +0000 (09:59 -0400)] 
Merge branch 'RIPPLE-63'

8 years agoMerge branch 'ripple-61'
Brent Lintner [Thu, 26 Jun 2014 13:52:10 +0000 (09:52 -0400)] 
Merge branch 'ripple-61'

https://github.com/apache/incubator-ripple/pull/24

8 years agoFEATURE added dummy nfc module 31/head
simon [Mon, 23 Jun 2014 13:10:01 +0000 (15:10 +0200)] 
FEATURE added dummy nfc module

8 years agoFIX added missing cordova 3.0 action File.requestAllPaths (doc)
simon [Mon, 23 Jun 2014 12:34:06 +0000 (14:34 +0200)] 
FIX added missing cordova 3.0 action File.requestAllPaths (doc)

8 years agoFIX added missing cordova 3.0 action File.requestAllPaths
simon [Mon, 23 Jun 2014 12:31:39 +0000 (14:31 +0200)] 
FIX added missing cordova 3.0 action File.requestAllPaths

8 years agoUse local proxy instead of remote by default 25/head
Vladimir Kotikov [Wed, 4 Jun 2014 10:32:44 +0000 (14:32 +0400)] 
Use local proxy instead of remote by default
See https://issues.apache.org/jira/browse/RIPPLE-63

8 years agoFix RIPPLE-61: search for locally installed cordova module before expecting to find... 24/head
Marko Raatikka [Thu, 15 May 2014 13:58:07 +0000 (16:58 +0300)] 
Fix RIPPLE-61: search for locally installed cordova module before expecting to find it globally installed

8 years agoFix RIPPLE-60 - proxy not detecting json properly 23/head
Farid Neshat [Tue, 13 May 2014 13:12:38 +0000 (21:12 +0800)] 
Fix RIPPLE-60 - proxy not detecting json properly

It didn't support stuff like
`Content-Type: application/json;charset=UTF-8` before. Now it does.

8 years agov0.9.22 0.9.22
Brent Lintner [Thu, 24 Apr 2014 22:27:37 +0000 (18:27 -0400)] 
v0.9.22

8 years agoAddresses #45 - Firefox support related
Raymond Camden [Tue, 15 Apr 2014 15:57:12 +0000 (10:57 -0500)] 
Addresses #45 - Firefox support related

8 years agoSmall lint error.
Brent Lintner [Thu, 24 Apr 2014 22:17:27 +0000 (18:17 -0400)] 
Small lint error.

8 years agofixes RIPPLE-58 [Image Capture] Image preview is not rendered
sgrebnov [Wed, 2 Apr 2014 16:09:16 +0000 (20:09 +0400)] 
fixes RIPPLE-58 [Image Capture] Image preview is not rendered

8 years agoThere were some unused variables.
Brent Lintner [Thu, 24 Apr 2014 22:09:39 +0000 (18:09 -0400)] 
There were some unused variables.

8 years agoTriple equals and unused function vars are too terse for this project.
Brent Lintner [Thu, 24 Apr 2014 22:08:39 +0000 (18:08 -0400)] 
Triple equals and unused function vars are too terse for this project.

This is user pref lint.

8 years agoAdd initial support of ScanditSDK plugin
Андрей [Fri, 4 Apr 2014 20:08:56 +0000 (00:08 +0400)] 
Add initial support of ScanditSDK plugin

8 years agoAdd App.exitApp and App.overrideBackbutton methods support
Андрей [Fri, 4 Apr 2014 16:24:32 +0000 (20:24 +0400)] 
Add App.exitApp and App.overrideBackbutton methods support

8 years agoFix notifications, now support latest cordova api
Andrew Tereshko [Fri, 23 Aug 2013 10:48:42 +0000 (14:48 +0400)] 
Fix notifications, now support latest cordova api